Horizontal Froth Foam Slurry Pump

Basic Info.

Model NO.	BHF
Position of Pump Shaft	Vertical Pump
Pump Casing Combined	Horizontal Split Pumps
Mounting Height	Suction Centrifugal
Impeller	Closed
Usage	Pumps
Application	Mining, Coal, Slurry Pump
Mqq	1 Set
After-Sales	Yes
Seal Form	Gland Packing, Mechanical Seal, Expeller Seal
Interchangeable	Yes
Product Name	Horizontal Froth Pump
Factory	Yes
Slurry Pump	Froth Slurry Pump
OEM	Yes
Color	Customised Color
Discharge Diameter	2-8 Inch
Mining Object	Metallic and Non-Metallic Ore Excavator
Material	High-Chromium Alloy B05 B07 Ni-Hard etc.
Transport Package	Wooden Case or as Required
Trademark	boda
Origin	Shijiazhuang, Hebei
HS Code	8413709990
Production Capacity	100sets/Month

Product Description

Horizontal Centrifugal Froth Slurry Pump Description:

Horizontal froth pumps are of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. Its pumping operations can be plagued by froth and high viscosity problems. In the liberation of minerals from ore, the minerals are often floated through the use of strong flotation agents. Tough bubbles carry the copper, molybdenum or iron tails to be recovered and further processed. These tough bubbles create havoc with many slurry pumps, often leading to the selection of overly large and inefficient pumps. Horizontal froth pumps are small and efficient. The inducer impeller and oversized inlet very effectively enable the froth or viscous slurries to get into the impeller allowing the pump to transport it to the next destination. Low power costs, reliable operation, minimal surging, and feed tank overflow make BODA froth pumps user friendly.

Specification :

• Size range (discharge)2" to 8" 100 mm to 150 mm
• Capacitiesto 3,000 gpmto 680 m3/hr
• Headsto 240 ft to 73 m
• Pressuresto 300 psito 2,020 kPa

Materials of Construction

	LINERS	IMPELLERS	CASING	BASE	EXPELLER	EXPELLER RING	SHAFT SLEEVE	SEALS
Standard	Chrome Alloy Natural Rubber	Chrome Alloy Natural Rubber	SG Iron	SG Iron	Chrome Alloy or SG Iron	Chrome Alloy or SG Iron	SG Iron	Rubber and Nitrile
Options	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon	SG Iron Various grades	MS Fabricated Cast Iron	NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151	NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile	EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS	Ceramic Stellite Chrome Oxide Nordel Neoprene Viton

Introduction of Centrifugal Slurry Pump :
1. Abrasion and corrosion resisting 2. Material: hard alloy metal(Cr27,Cr28, Cr30, CD4MCu) or rubber liner optional, 3. Shaft seal: packing seal, expeller seal, and mechanical seal.4. Power driver: electrical motor or diesel engine. Application of Centrifugal Slurry Pump :
Deliver slurry with hard particle, in the mining, metallurgy, coal washing, power plant, sewage water treatment, dredging, and chemical and petroleum industries 1. Conveying mortar,slag which are strong corrosive and with solid particles.2. Widely used in extracting sand, marine reclamation land,power plant,mining.Features of Centrifugal Slurry Pump :

1. Multi-purpose sand and gravel pump, high efficiency and energy saving.2. Horizontal, centrifugal, one stage, single casing slurry pump.3. Distinctive innovation in hydraulic and structural design.4. Pump discharge direction can be changed in any 45 degree,easy installation.5. Long-term bearing life: The bearing assembly is composed of large diameter shaftand short overhang.

Component of Centrifugal Slurry Pump:
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth lock nut, end cover and shaft sleeve are used for bearing assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.

1. All of the rubber parts have superior erosion resisting performance which can be used for a long life.

Drive type of Centrifugal Slurry Pump:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.

Horizontal foam froth slurry pumps and parts:
Our service
1.Any inquires will be replied within 8 working hours.
2.Professional centrifugal pump manufacturer, welcome to visit our website (on-line store) and factory.
3.Customized design is available, OEM and ODM are welcomed.
4.High quality, reasonable & competitive price.
5.Fast lead time, 5-25days for bulk pump production
6.Payment: we usual accept payment by T/T, L/C and western union.
7.We have strong cooperation with forwarder, you also can chose your own shipping forwarder.
8.After-sale service: all centrifugal pumps will have been strictly quality checked in house before packing. All centrifugal pumps will be well packed as request before shipping.
FAQ1. What Products does BODA pump mainly produce? BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 2. Is BODA direct factory or trader? BODA own foundry workshop, Machining Workshop, and Assembly workshop. Welcome to visit our factory anytime. 3. The Min MQQThe MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes? If you need the spare parts, we need to know the parts Code and material. If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. Welcome to Contact MeShijiazhuang Boda Industrial Pump Co.,Ltd : alisa